|
Not enough water
Make sure the water tank is full with more than enough water
to make your selected coffee.
Water tank not positioned correctly
Make sure that the water tank is correctly placed onto the system. A spout piece is not installed or not positioned correctly The spout of the L’OR BARISTA system is removable and washable to ensure the best quality and coffee taste. If your spout is leaking, make sure that you have correctly assembled the two-piece coffee dispensing spout by following below steps: 1.Remove the two-piece coffee dispensing spout by pulling it straight down 2.Reassemble the two parts by inserting the grey piece into the black piece. Attach the spout by pushing both pieces upwards into the appliance until they 'click' into place.
coffee dispensing spout is dirty 1.Remove the coffee dispensing spout by pulling it straight down 2.Disassemble the coffee dispensing spout and rinse all parts with water or clean using the dishwasher 3.Reassemble all parts and place back onto the system.
Cleaning and Maintenance Make sure you are descaling the system when you see the small drink and large drink buttons are flashing at the same time after brewing. Descaling prolongs the life of your L'OR Barista coffee & espresso system and ensures proper water flow by cleansing the internal system of limescale build-up. Coffee capsule is not pierced If a capsule wasn’t pierced, water cannot enter to brew the coffee. To solve this issue, follow the steps below to reset the piercing mechanism: 1.Open the lever and insert a used capsule. 2.Close the lever and open it again to reset the piercing mechanism |
